Anytone AT-578UV Codeplug

A minimalist, SARA oriented codeplug for the Anytone AT-578UV mobile radio is available from this page. It is up to date with local frequencies and the entire world-wide RadioID DMR database as of 12-10-2019. No warranties are expressed or implied. This codeplug will be useful for people in range of SARA’s repeaters, but does not contain every repeater in the state. We strongly encourage you to customize this codeplug for your needs!

This radio is basically a mobile version of the popular AT-878UV portable and is a reasonably good DMR radio. In addition to DMR, it covers 2m, 220MHz, and 440MHz analog along with analog APRS (transmit only).

The codeplug contains zones for:

If you’d like to keep what you have just in case, you should read your radio with your programming cable and Anytone software and save the file as a backup.

To use this codeplug, you must download it, open it in your programming software, and MUST make changes on two screens,save the file locally, and write it to your radio:

Change 1: Under Digital…Radio ID List, change the Radio ID to your DMR ID number. This is the 7 digit number you have when you registered on RadioID.net or DMR-MARC. Also change the Name to your callsign on the same screen.

Change 2: Under Public…Optional Settings: Change the Startup screen to something that makes sense to you. This is free form and not needed by DMR – but is what will appear when you turn the radio on.

Change 3 (optional): You may also wish to at least review the button settings to see what the various buttons on the front panel and microphone are configured to do, and perhaps customize them for your needs.

You can choose other options for each button if you like under Optional Setting…Key Functions. There are many, many buttons to configure on this radio between the front panel and hand mic.

Download Codeplug

SARA Codeplug for the Anytone AT-578UV Mobile

Comments are closed.